HGH55CA HIWIN-manufacture,factory,supplier from China

1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that of heavy-duty bearings. You must understand this. In order to meet different industrial production or processing needs, bearings must have different performance. The different materials of various bearings are actually due to this reason.Another point is the difference in physical structure.

The so-called burn damage state of  bearings refers to the rapid heating of the raceway wheel, rolling element, and retainer of  bearings during rotation until discoloration, softening, deposition, and damage occur.The main reason for bearing burns is due to poor lubrication of  bearings, which may have used non-standard lubricants or excessive or insufficient lubricants, both of which are incorrect. Secondly, it may be due to excessive load (excessive preloading). The rotational speed is too high. The clearance is too small. There is water or other foreign objects invading.

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

On the occasion of the opening of the 2023 Asia International Power Transmission and Control Technology Exhibition, on behalf of the company, I would like toextend a warm welcome to customers and friends from all over the world! Warm congratulations on the convening of the 2023 Asia International Power  Transmission and Control Technology Exhibition (PTC ASIA)!This year's PTC exhibition is particularly focused on the new ecosystem of intelligent manufacturing.

As the world's largest automotive industry chain exhibition, the 2024 Frankfurt Shanghai Auto Parts Exhibition grandly opened at the China National Exhibition Center today (December 2). The exhibition gathers rich resources from the global automotive industry chain, providing an efficient service platform for information exchange, industry promotion, and business services for participants at home and abroad.The 2024 Frankfurt Shanghai Auto Parts Exhibition covers an area of 350000 square meters and gathers more than 6700 exhibiting companies from around the world.

The 2nd Hangzhou Auto Parts Expo was grandly opened in Zhejiang from March 29th to March 31st, with nine special zones set up, attracting a large number of customers from home and abroad.1、 Automotive Parts ZoneAutomotive components and assemblies: engine system, braking system, body/chassis system, air conditioning system, standard parts, vulnerable parts2、 Automotive Supplies and Modification ZoneOn board electronic appliances, pendant, car perfume, wiper LED、 Seat cushion, foot pad, interior kit upgrade, vehicle modification parts, power modification parts3、 Motorcycle Parts ZoneEngine comp

The 20th anniversary celebration of the 2024 Shanghai International Auto Parts, Maintenance, Testing, Diagnostic Equipment and Service Supplies Exhibition (Automechanika Shanghai) was successfully held from December 2 to 5, 2024 at the National Convention and Exhibition Center (Shanghai). The number of participating companies and visitors at this exhibition has broken previous records, fully demonstrating the important influence of Automechanika Shanghai as a professional service platform in the industry, and also reflecting the thriving development of the automotive industry.

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

On September 23rd, the 23rd China International Industrial Expo (CIIE) closed at the National Convention and Exhibition Center (Shanghai). This year's Industrial Expo lasts for 5 days, with a total of 9 professional exhibition areas, attracting over 2800 enterprises from 30 countries and regions around the world to participate.  The exhibition covers an area of 300000 square meters, and nearly a thousand new technologies and exhibits have made their debut.

1. Is the outer packaging clearIn general, legitimate brands have their own dedicated designers to design the external packaging and arrange factories with qualified production conditions for production. Therefore, the packaging is very clear and unambiguous from lines to color blocks.2. Is the steel stamp clearThe brand name, number, etc. will be printed on the imported bearing body of FAG. The font is very small, but most of the products produced by the factory use steel stamping technology and are pressed before being overheated.